Key Highlights

  • 4 mic/line inputs and 8 mic/line outputs.
  • Support for SIP-based conferencing up to 5 lines and 5 calls based on line configuration.
  • 16 Dante inputs and 16 Dante outputs for audio networking.
  • Analog Telco interface.
  • Built-in Skype for Business client.
  • Built-in USB audio.
  • Built-in DARE™ algorithm for dynamic feedback elimination.
  • C-Link and P-Link enable easy addition of DSPs and peripherals.
  • Configure an entire system of C-linked DSPs with CONSOLE AI software.
  • Flexible control options include Touch-Panel Controller, BYOD dial
  • Reduced foot-print and power consumption.

Applications

  • VoIP Conferencing
  • POTS conferencing
  • Audio recording
  • Pre-recorded digital audio
  • Audio networking over a LAN
  • Web conferencing
  • UC audio conferencing
  • Sound reinforcement
  • Bridge web conferences

Workspaces

  • Conference rooms
  • Training rooms
  • Lecture halls
  • Courtrooms
  • Telemedicine theaters
  • Houses of Worship

MIC/LINE INPUTS & OUTPUTS

  • • Inputs: Balanced audio inputs, 3.81mm Orange color
    Phoenix/Euroblock type male header, Push-on miniterminal
    block
    • Outputs: Balanced audio outputs, 3.81mm Black color
    Phoenix/Euroblock type male header, Push-on miniterminal
    block
    • Frequency Response: 20Hz – 22kHz @ +4dBu, +/-
    0.5dBu
    • EIN (Equivalent Input Noise): 20kHz BW, max gain, Rs
    = 150Ω, -126dBu
    • THD + N (Total Harmonic Distortion + Noise):
    • - 20Hz – 22kHz @ +4dBu, line level, 0.006%
    • - 20Hz – 22kHz @ -56dBu, mic level, <0.04%
    • Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
    • Crosstalk (Mic/Line): Channel to Channel, stimulus at
    20dBu to receptor at -56dBu, 1kHz, < -98dB
    • Input Impedance: Balanced (line to ground), 2.2kΩ,
    1%
    • Nominal Input Level: Adjustable -56dB to 0dB, 7dB
    step coarse gain
    • Maximum Input Level: -65dBu to 20dBu
    • Phantom Power: 48V, Impedance 6.81kΩ
    • Output Impedance: Balanced (line to ground), 95Ω,
    1%
    • Output Level: 0dBu (Nominal), 20dBu (Max), -40dBu
    (Selectable)

USB AUDIO

  • • Port Type: USB-B connector
    • Audio: Digital Audio, 2 x 2 bidirectional channels
    • Sample Rate: 48kHz
    • Sample Bit Depth: 24-Bit
    • Compatible: USB 2.0, USB 3.0

TELEPHONE

  • • Port Type: RJ11
    • Frequency Response:
    • - Mic/Line Input to Telephone Out: 250Hz – 3.4kHz ,
    +/- 2dB, 4dBu
    • - Telephone In to Mic/Line Out: 250Hz – 3.4kHz, +/-
    2dB, -15dBu
    • THD + N:
    • - Mic/Line Input to Telephone Out: <0.1% @ 4dBu
    • - Telephone In to Mic/Line Out: <0.3% @ -15dBu
    • Dynamic Range:
    • - Mic/Line Input to Telephone Out: >67dBu
    • - Telephone In to Mic/Line Out: >87dBu
    • REN: Ringer Equivalent Number 0.2
    • Transhybrid Balance: 30dB (1kHz, all AC terminations)

VOIP

  • • Port Type: RJ-45, 10/100Mbps Ethernet Network, Auto
    Negotiation
    • Audio: 5 Lines
    • Codec: G.711 uLaw, G.711 ALaw, G.722
    • Skype for Business (S4B):
    • - Microsoft Skype for Business support (1 client)
    • - Choose either regular VoIP or S4B through
    configuration

ETHERNET

  • • Port Type: RJ-45, 10/100Mbps Ethernet Network, Auto
    Negotiation
    • IP address: IPv4 (IPv6 upgradeable through future
    s/w, f/w upgrade)
    DANTE™ AUDIO
    • Port Type: RJ-45 Gigabit Ethernet connectors for
    Primary and Secondary Ports
    • Audio: Digital Audio, 16 x 16 bidirectional channels
    • Sample Rate: 48kHz / 96kHz
    • Sample Bit Depth: 24-Bit
    C-LINK EXPANSION BUS
    • Ports Type: RJ-45 (Cat5e or Cat6)
    • C-Link In & Out: Proprietary Expansion Bus
    • Audio: 64 Expansion channels
    • Cable: Solid core, factory terminated Cat 5e or 6
    cable
    • Distance: Up to 150’ (45M)

P-LINK PERIPHERAL BUS

  • • Ports Type: RJ-45 (Cat5e or Cat6)
    • P-Link In & Out: Proprietary Peripheral Bus
    • PoE In:
    • - P-Link In Port
    • - PoE 802.3af Mode B, Midspan
    • - Power on “spare pairs” 4,5 and 7,8
    • - Input voltage range: 48V to 56V
    • Audio: Up to 3 BMA CT units + up to 3 DIALOG 20
    Wireless Receiver units + Up to 3 USB Expander units
    + Up to 3 GPIO Expander units
    • Cable: Solid core, factory terminated Cat 5e or 6
    cable
    • Distance: Up to 200’ (60M)
    • Long Distance P-Link:
    • - Increases P-Link distance from 200 Ft to 650 Ft
    • 650 Ft (200M) maximum cable distance between any
    two units
    • - Cat6, 550 MHz, 23 AWG, solid conductor cable
    • - Do not use Copper Clad Aluminum (CCA) cable
    • - Available only for BFM2 peripheral units
    • - 48V PoE Midspan Mode B power injector for 1 BFM2
    unit
    • - 56V PoE Midspan Mode B power injector for 3 BFM2
    units

RS232

  • • Port Type: DB9 Female
    • Settings: 9600/19200/38400/57600/115200 Baud;
    Serial Echo; Flow Control
    • Support: Serial commands

GPIO

  • • Port Type: 5.08mm Green color Phoenix/Euroblock
    type male header
    • Support: Control, Status, Variable Voltage Control
    • Power Pin: 5V DC @ 350mA Power Source
    • Pin 1 to 4:
    • - Open Collector Outputs: 40VDC @ 250mA
    • - Active Outputs (Source/Sink): 5VDC @25mA
    • - Logic Inputs: 40.2kΩ pull up
    • - Variable Voltage Control Inputs: 5VDC max
    • Ground Pin: GND

USB CONTROL

  • • Port Type: USB-B connector
    • Location: Front Panel
    • Compatible: USB 2.0, USB 3.0

LEDs

  • • Location: Front Panel
    • Status LED:
    • - Off: Unit still initializing
    • - Blue - Fast Blinking: Stack Syncing in progress
    • - Blue - Slow Blinking: Unit not configured
    • - Blue - Solid: Configured unit
    • - Red - Fast Blinking: Stack Sync error
    • Locate LED: Blue - Blinking: Unit “Locate” command
    received
    • Power LED: Blue - Solid: Unit is powered on

TOUCH SENSOR

  • • Sensor Type: Capacitive Touch Button
    • Location: Front Panel
    POWER & THERMAL
    • Port Type: AC Inlet
    • Mains Voltage: 100-240V AC, 50/60Hz
    • Power Consumption: 50 Watts Typical
    • Thermal: 170 BTU/Hr Typical
    • Operating Temperature: 14°F (-10°C) to 104°F (40°C)
    Ambient Temperature

DIMENSION & WEIGHT

  • • RU size: 1 RU
    • Width x Depth x Height:
    • 1. Without rack-ears: 17”W x 10.73”D x 1.72”H (43.2cmW
    x 27.3cmD x 4.4cmH)
    • 2. With rack-ears: 19”W x 10.73”D x 1.72”H (48.3cmW x
    27.3cmD x 4.4cmH)
    • Unit Weight: 9.3 lbs (4.2 kg) (Approximately)
    • Shipping Weight: 13.8 lbs (6.3 kg) (Approximately)

PACKAGE

  • • Power Cord: 6’ (1.8M), Grounded, Qty 1
    • Input Connectors: Terminal Block Connector, 4
    Position (Orange), Qty 12
    • Output Connectors: Terminal Block Connector, 3
    Position (Black), Qty 8
    • GPIO Connector: Terminal Block Connector, 6 Position
    (Green), Qty 1
    • C-Link Cable: RJ-45 To RJ-45 Cable, 18” (45.7cm), Qty 1
    • VoIP Cable: RJ-45 To RJ-45, 7’ (2M), Qty 1
    • USB Cable: USB Type A to Type B, 6’ (1.8M), Qty 1
    • Rack Ears: Pre-installed, Qty 2
    • Screw/Washer Kit: Rack Decor, Qty 4

PART NUMBER

  • • 910-3200-008-D CONVERGE Pro 2 48VTD