CONVERGE® Pro 2 is the industry’s most advanced professional audio DSP platform for conferencing and sound reinforcement applications. It outperforms in any size room, audio environment, and application.
Built-in Native Camera Tracking for ClearOne Unite cameras and many 3rd party cameras using RS-232 and Ethernet VISCA over IP.
The 128SR model mixer has 12 inputs, 8 outputs, USB audio; GPIO, RS-232, IP control interfaces; and P-Link and C-Link expansion buses.
12 mic/line outputs.
Reduced footprint and power consumption.
DARE™ feedback elimination.
Standalone and daisy-chained system.
Stack up units up to 144 Mic/Line inputs.
Expansion bus “C-Link” with 150 channels.
Configure and manage entire system with New CONSOLE® software, Auto-discovery of devices, MatrixView™ for entire system, FlowView™ for visualized audio signal paths and System monitoring and troubleshooting.
Flexible control options include 3rd party control modules for integrated systems.
Acoustic Intelligence for better audio.
Advanced microphone gating.
Noise Cancellation with Adaptive-Ambience.
“P-Link” bus to connect peripheral devices.
Daisy-chain the CONVERGE Pro 2 with the BMA 360, DIALOG® 20 2-Channel Wireless Microphone System, and other peripheral devices through P-Link.
Port Type: RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
IP address: IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)
C-LINK EXPANSION BUS
Ports Type: RJ-45 (Cat5e or Cat6)
C-Link In & Out: Proprietary Expansion Bus
Audio: 64 Expansion channels
Cable: Solid core, factory terminated Cat 5e or 6
Distance: Up to 80’ (24M)
P-LINK PERIPHERAL BUS
Ports Type: RJ-45 (Cat 5e or Cat 6)
P-Link In & Out: Proprietary Peripheral Bus
PoE In:
P-Link In Port
PoE 802.3 af Mode B, Midspan
Power on “spare pairs” 4, 5 and 7, 8
Input voltage range: 48 V to 56 V
Audio: Up to 3 DIALOG 20 Wireless Receiver units + Up to 3 USB Expander units + Up to 3 GPIO Expander units
Cable: Solid core, factory terminated Cat 5e or 6 cable
Distance: Up to 200 ’ (60 M)
RS-232
Port Type: DB9 Female
Settings: 9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
Support: Serial commands
GPIO
Port Type: 5.08mm Green color Phoenix/Euroblock type male header
Support: Control, Status, Variable Voltage Control
Power Pin: 5V DC @ 350mA Power Source
Pin 1 to 4:
- Open Collector Outputs: 40VDC @ 250mA
- Active Outputs (Source/Sink): 5VDC @25mA
- Logic Inputs: 40.2kΩ pull up
- Variable Voltage Control Inputs: 5VDC max
USB CONTROL
Port Type: USB-B connector Port Type: USB-B connector
Location: Front Pane
Compatible:
- USB 2.0
- USB 3.0
LEDs
Location: Front Panel
Status LED:
- Off: Unit still initializing
- Blue - Fast Blinking: Stack Syncing in progress
- Blue - Slow Blinking: Unit not configured
- Blue - Solid: Configured unit
- Red - Fast Blinking: Stack Sync error
Locate LED: Blue - Blinking: Unit “Locate” command received
Power LED: Blue - Solid: Unit is powered on
TOUCH SENSOR
Sensor Type: Capacitive Touch Button
Location: Front Panel
POWER & THERMAL
Port Type: AC Inlet
Mains Voltage: 100-240V AC, 50/60Hz
Power Consumption: 50 Watts Typical
Thermal: 170 BTU/Hr Typical
Operating Temperature: 14°F (-10°C) to 104°F (40°C) Ambient Temperature
DIMENSION & WEIGHT
RU size: 1 RU
Width x Depth x Height:
1. Without rack-ears: 17.1 x 10.7 x 1.7 “ (431 x 273 x 44 mm)
2. With rack-ears:19.1 x 10.7 x 1.7 “ (483 x 273 x 44 mm)
Unit Weight: 9.3 lbs (4.2 kg) (Approximately)
Shipping Weight: 13.8 lbs (6.3 kg) (Approximately)
PACKAGE
Power Cord: 6 ’ (1.8 M), Grounded, Qty 1
Input Connectors: Terminal Block Connector, 4 Position (Orange), Qty 12
GPIO Connector: Terminal Block Connector, 6 Position (Green), Qty 1